 |
YAL-ZL
CS
27800*7310*5850mm
380v±10% customized
-20℃~+50℃
| Quantity: | |
|---|---|
Our position is professional plate automation intelligent production. Our strength is the whole
case design and manufacture of plate production equipment including equipment selection
scheme, custom workshop layout, production logistics and so on.
A lamination short cycle press line is a state-of-the-art manufacturing system used in the production of laminate flooring. It combines various components and processes to create high-quality laminate flooring products efficiently and cost-effectively. These press lines are designed to handle the entire production cycle, from material preparation to finishing.
YAL-ZL automatic production line is a fully automatic production line with a full-cycle design for melamine veneer. It features automatic board application and pressing, edge trimming, cleaning, drying, and stacking functions. By shifting and replacing steel templates with different patterns, it can produce high-end wood panels with glossy, matte, marble, and wood grain finishes. The main difference between YAL-ZL and YAL-ZA automatic lines lies in the cross-stacking capability, allowing for quick production of wooden flooring, furniture panels, and door panels.
Raw Board: Particle Boards, MDF Boards and HDF Boards.
Product: Furniture Board,Laminate Flooring
Overlaying Materials: Melamine Paper
Dimention of the basic short cycle press line: 27800*7310*5850mm
Certification: ISO9001, CE
Size of the Melamine Board can be produce: 4'×8' ; 5'×8' ; 6'×8' ; 4'×9' ; 5'×9' ; 6'×9' ; 4'×10' ; 5'×10' ,etc.
Common processed plate specification: 48 ft (Length 2440×Width 1220× Height: 8-30 mm)
Production Capacity: 100pcs boards/ hour
● 24 hours continuous production
● Paper, plate and other raw materials be replaced within 30 minutes
● Designed to work fully for more than 28 days per month
● The rate of defective products is less than 3 parts per thousand
● Precision and Quality Control
● Flexibility in Design and Materials
● Energy Efficiency
● Operator-Friendly Interface
● The used substrates and melamine paper must meet the process requirements.
● There should be no frequent shutdowns/maintenance during production. maintain work continuity.
● Do not arbitrarily change the processes and equipment operating speeds during production.
A short cycle lamination press line consists of various essential components that work in tandem to ensure smooth and efficient production. These components include heating and cooling systems, a pressing unit, a conveyor system, and a control panel.
The heating and cooling systems are crucial components of a short-cycle lamination press line. These systems ensure precise temperature control during the pressing process. The heating system allows the laminate materials to reach the required temperature for lamination, while the cooling system rapidly cools down the pressed materials, enabling quick demolding and maintaining dimensional stability.
The pressing unit is the heart of the short-cycle press line. It consists of hydraulic or mechanical presses that exert controlled pressure on the laminate materials, creating a bond between the layers. The pressing unit's design and capabilities directly impact the quality and efficiency of the lamination process.
The conveyor system transports the laminate materials through the various stages of the press line. It ensures a continuous and automated workflow, minimizing manual handling and optimizing production speed. The conveyor system is designed to withstand high temperatures and pressures, guaranteeing smooth material flow throughout the process.
The control panel is the centralized interface that allows operators to monitor and control the entire short cycle press line. It provides real-time data on process parameters, temperature, pressure, and cycle times. The control panel also enables operators to make adjustments, troubleshoot issues, and ensure efficient operation.
We are a machine manufactuer factory, with own professional design team.
Our factory is located in Changzhou, Jiangsu Province, China one hour from Shanghai by train.
The pressing unit applies controlled pressure to laminate materials, creating a strong bond between layers during the lamination process.
The cooling system rapidly cools down the pressed materials, allowing for quick demolding, dimensional stability, and efficient workflow.
Manufacturers should consider factors such as production capacity, customization options, energy efficiency, maintenance and service support, and overall cost-effectiveness.
Operators can optimize performance by ensuring regular maintenance, conducting quality control checks, analyzing process data, and implementing automation and AI technologies.
Future trends include sustainable manufacturing practices, digitalization, customization and personalization, and the use of lightweight and innovative materials.
Our position is professional plate automation intelligent production. Our strength is the whole
case design and manufacture of plate production equipment including equipment selection
scheme, custom workshop layout, production logistics and so on.
A lamination short cycle press line is a state-of-the-art manufacturing system used in the production of laminate flooring. It combines various components and processes to create high-quality laminate flooring products efficiently and cost-effectively. These press lines are designed to handle the entire production cycle, from material preparation to finishing.
YAL-ZL automatic production line is a fully automatic production line with a full-cycle design for melamine veneer. It features automatic board application and pressing, edge trimming, cleaning, drying, and stacking functions. By shifting and replacing steel templates with different patterns, it can produce high-end wood panels with glossy, matte, marble, and wood grain finishes. The main difference between YAL-ZL and YAL-ZA automatic lines lies in the cross-stacking capability, allowing for quick production of wooden flooring, furniture panels, and door panels.
Raw Board: Particle Boards, MDF Boards and HDF Boards.
Product: Furniture Board,Laminate Flooring
Overlaying Materials: Melamine Paper
Dimention of the basic short cycle press line: 27800*7310*5850mm
Certification: ISO9001, CE
Size of the Melamine Board can be produce: 4'×8' ; 5'×8' ; 6'×8' ; 4'×9' ; 5'×9' ; 6'×9' ; 4'×10' ; 5'×10' ,etc.
Common processed plate specification: 48 ft (Length 2440×Width 1220× Height: 8-30 mm)
Production Capacity: 100pcs boards/ hour
● 24 hours continuous production
● Paper, plate and other raw materials be replaced within 30 minutes
● Designed to work fully for more than 28 days per month
● The rate of defective products is less than 3 parts per thousand
● Precision and Quality Control
● Flexibility in Design and Materials
● Energy Efficiency
● Operator-Friendly Interface
● The used substrates and melamine paper must meet the process requirements.
● There should be no frequent shutdowns/maintenance during production. maintain work continuity.
● Do not arbitrarily change the processes and equipment operating speeds during production.
A short cycle lamination press line consists of various essential components that work in tandem to ensure smooth and efficient production. These components include heating and cooling systems, a pressing unit, a conveyor system, and a control panel.
The heating and cooling systems are crucial components of a short-cycle lamination press line. These systems ensure precise temperature control during the pressing process. The heating system allows the laminate materials to reach the required temperature for lamination, while the cooling system rapidly cools down the pressed materials, enabling quick demolding and maintaining dimensional stability.
The pressing unit is the heart of the short-cycle press line. It consists of hydraulic or mechanical presses that exert controlled pressure on the laminate materials, creating a bond between the layers. The pressing unit's design and capabilities directly impact the quality and efficiency of the lamination process.
The conveyor system transports the laminate materials through the various stages of the press line. It ensures a continuous and automated workflow, minimizing manual handling and optimizing production speed. The conveyor system is designed to withstand high temperatures and pressures, guaranteeing smooth material flow throughout the process.
The control panel is the centralized interface that allows operators to monitor and control the entire short cycle press line. It provides real-time data on process parameters, temperature, pressure, and cycle times. The control panel also enables operators to make adjustments, troubleshoot issues, and ensure efficient operation.
We are a machine manufactuer factory, with own professional design team.
Our factory is located in Changzhou, Jiangsu Province, China one hour from Shanghai by train.
The pressing unit applies controlled pressure to laminate materials, creating a strong bond between layers during the lamination process.
The cooling system rapidly cools down the pressed materials, allowing for quick demolding, dimensional stability, and efficient workflow.
Manufacturers should consider factors such as production capacity, customization options, energy efficiency, maintenance and service support, and overall cost-effectiveness.
Operators can optimize performance by ensuring regular maintenance, conducting quality control checks, analyzing process data, and implementing automation and AI technologies.
Future trends include sustainable manufacturing practices, digitalization, customization and personalization, and the use of lightweight and innovative materials.
